If you are looking for more control while turning with more effectiveness, then your car may require a power steering. It aids the driver because it can be challenging to turn the wheel while parked due to the weight of the vehicle. It might be nearly impossible to move the wheel at low speeds without a power steering pump. The car’s pulley system correctly powers it. However, without a unique tool called a power steering pulley puller, adjusting the power steering is challenging.

What Does a Power Steering Pulley Puller Do?

A power steering pulley puller is a mechanical tool. It is specially designed to remove a pulley from a power steering pump. The pulley puller works by using a central bolt or screws to exert mechanical force on the pulley. It has a working principle of gradually pulling it off the shaft of the power steering pump. In simple words, if we want to talk about what does a pulley puller do? Then the answer must be that it removes the pulley from the power steering pump. There is a certain way of using it.

Why Do You Need A Pulley Puller?

Whenever there is a problem with the power steering assembly, a user may need a pulley puller. In certain cases, a mechanic or a user may need to uninstall the parts of the assembly. You may need a power steering pulley puller to safely and efficiently remove the pulley from a power steering pump. The power steering pulley is an important component of the power steering system in a vehicle. It is responsible for transferring the rotational force from the engine to the power steering pump. The pump then uses this force to provide power assistance to the steering system, making it easier to turn the steering wheel.

A power steering puller is designed to fit comfortably around the pulley and apply even mechanical force to remove it from the power steering shaft of the pump. This is a safer and more efficient way to remove the pulley than using other methods, you can also use a pry bar or hammer. But this process is more efficient and bends on the safer side the other options can cause damage to the shaft or to the pulley. 

Using a power steering pulley puller can also help to ensure that the replacement pulley is installed properly. By using the puller to remove the old pulley, you can inspect the power steering pump for any signs of wear or damage. And make any necessary repairs or replacements. Once the pump is inspected and serviced, a new pulley can be installed using a pulley installer tool, which works in the opposite way to a puller.

How Do You Use a Power Steering Pulley Puller?

Using a power steering puller is a simple but effective process.  But it’s important to follow the correct steps to avoid damaging the power steering pump or pulley. Here is a general guide for using a power steering puller:

Disconnect the power steering pump: 

The first step in using a power steering puller is to disconnect the power steering pump from the vehicle’s engine and any associated hoses or belts. This will provide access to the power steering pulley, which is usually located on the front of the pump.

Attach the puller arms: 

The next step is to attach the puller arms to the pulley. The puller arms are designed to fit securely around the pulley and provide a stable grip. The arms should be placed around the pulley and then secured in place using the bolts or screws provided with the puller.

Tighten the central bolt or screw: 

Once the puller arms are securely attached to the pulley, the central bolt or screw of the puller should be threaded through the center of the arms. And tightened until the arms are snug against the pulley. Make sure the puller is in the center of the pulley and there is even spacing between the puller arms. 

Apply force to the pulley: 

• After attaching the puller properly to the pulley, you should tighten the central bolt or screw further. A user should do it by slowly applying force to the pulley. Do this in a gentle manner just to avoid damage to the pulley. You can use a ratchet or breaker bar to turn the central bolt, slowly tightening it until the pulley comes off.

Inspect the power steering pump: 

After removing the pulley, you should inspect the power steering pump for any signs of wear or damage. If there is any need for repairs or replacements, then you should execute it before installing the new pulley.

Best Power Steering Pulley Puller Available In The Market

There are many power steering pulley pullers available on the market, and the best one for you will depend on your specific needs and preferences. However, here are a few popular options that customers highly rate:

OTC 4530 Power Steering Pump Pulley Service Set: 

It is a comprehensive kit that includes a variety of puller arms and adapters, making it enough versatile to work with a range of power steering pumps. The kit also includes a storage case for easy organization and transport.

ABN Power Steering Pump Pulley Remover Installer Tool Kit: 

This kit comes with a puller and installer tool, as well as several different puller arms, making it a versatile and affordable option. The kit is made with high-quality materials and is designed to be easy to use.

Performance Tool W87022 Power Steering Pump Pulley Puller/Installer Tool: 

It is a budget-friendly option that is still highly effective. The tool fits with most power steering pulleys. Moreover, the material is of high durability to withstand frequent use. 

Lisle 39000 No Slip Pulley Puller: 

This pulley puller has a unique “no slip” grip, which helps prevent the arms from slipping off the pulley during use. The tool consists of high-quality materials and is helpful in working with a variety of power steering pumps.

Lang Tools 6489 Power Steering and Alternator Pulley Puller:

This is a versatile kit that includes several different puller arms, making it compatible with a wide range of power steering pumps and alternator pulleys. The kit is made with high-quality materials and is designed for easy use and storage.

Power Steering Pulley Puller – FAQs